RSS

Container Linux with systemd

etcd deployments with systemd under Container Linux

This is an adaptation of a page previously found in the Platforms section of the documentation which described etcd deployments on various platform services. The original page was authored by Gyuho Lee.


The following blog post shows how to run etcd with systemd under Container Linux.

Provisioning an etcd cluster

Cluster bootstrapping in Container Linux is simplest with Ignition; coreos-metadata.service dynamically fetches the machine’s IP for discovery. Note that etcd’s discovery service protocol is only meant for bootstrapping, and cannot be used with runtime reconfiguration or cluster monitoring.

The Container Linux Config Transpiler compiles etcd configuration files into Ignition configuration files:

etcd:
  version: 3.2.0
  name: s1
  data_dir: /var/lib/etcd
  advertise_client_urls:       http://{PUBLIC_IPV4}:2379
  initial_advertise_peer_urls: http://{PRIVATE_IPV4}:2380
  listen_client_urls:          http://0.0.0.0:2379
  listen_peer_urls:            http://{PRIVATE_IPV4}:2380
  discovery:                   https://discovery.etcd.io/<token>

ct would produce the following Ignition Config:

$ ct --platform=gce --in-file /tmp/ct-etcd.cnf
{"ignition":{"version":"2.0.0","config"...
{
  "ignition":{"version":"2.0.0","config":{}},
  "storage":{},
  "systemd":{
    "units":[{
      "name":"etcd-member.service",
      "enable":true,
      "dropins":[{
        "name":"20-clct-etcd-member.conf",
        "contents":"[Unit]\nRequires=coreos-metadata.service\nAfter=coreos-metadata.service\n\n[Service]\nEnvironmentFile=/run/metadata/coreos\nEnvironment=\"ETCD_IMAGE_TAG=v3.1.8\"\nExecStart=\nExecStart=/usr/lib/coreos/etcd-wrapper $ETCD_OPTS \\\n  --name=\"s1\" \\\n  --data-dir=\"/var/lib/etcd\" \\\n  --listen-peer-urls=\"http://${COREOS_GCE_IP_LOCAL_0}:2380\" \\\n  --listen-client-urls=\"http://0.0.0.0:2379\" \\\n  --initial-advertise-peer-urls=\"http://${COREOS_GCE_IP_LOCAL_0}:2380\" \\\n  --advertise-client-urls=\"http://${COREOS_GCE_IP_EXTERNAL_0}:2379\" \\\n  --discovery=\"https://discovery.etcd.io/\u003ctoken\u003e\""}]}]},
      "networkd":{},
      "passwd":{}}

To avoid accidental misconfiguration, the transpiler helpfully verifies etcd configurations when generating Ignition files:

etcd:
  version: 3.2.0
  name: s1
  data_dir_x: /var/lib/etcd
  advertise_client_urls:       http://{PUBLIC_IPV4}:2379
  initial_advertise_peer_urls: http://{PRIVATE_IPV4}:2380
  listen_client_urls:          http://0.0.0.0:2379
  listen_peer_urls:            http://{PRIVATE_IPV4}:2380
  discovery:                   https://discovery.etcd.io/<token>
$ ct --platform=gce --in-file /tmp/ct-etcd.cnf
warning at line 3, column 2
Config has unrecognized key: data_dir_x

See Container Linux Provisioning for more details.

etcd 3.x service

Container Linux does not include etcd 3.x binaries by default. Different versions of etcd 3.x can be fetched via etcd-member.service.

Confirm unit file exists:

systemctl cat etcd-member.service

Check if the etcd service is running:

systemctl status etcd-member.service

Example systemd drop-in unit to override the default service settings:

cat > /tmp/20-cl-etcd-member.conf <<EOF
[Service]
Environment="ETCD_IMAGE_TAG=v3.2.0"
Environment="ETCD_DATA_DIR=/var/lib/etcd"
Environment="ETCD_SSL_DIR=/etc/ssl/certs"
Environment="ETCD_OPTS=--name s1 \
  --listen-client-urls https://10.240.0.1:2379 \
  --advertise-client-urls https://10.240.0.1:2379 \
  --listen-peer-urls https://10.240.0.1:2380 \
  --initial-advertise-peer-urls https://10.240.0.1:2380 \
  --initial-cluster s1=https://10.240.0.1:2380,s2=https://10.240.0.2:2380,s3=https://10.240.0.3:2380 \
  --initial-cluster-token mytoken \
  --initial-cluster-state new \
  --client-cert-auth \
  --trusted-ca-file /etc/ssl/certs/etcd-root-ca.pem \
  --cert-file /etc/ssl/certs/s1.pem \
  --key-file /etc/ssl/certs/s1-key.pem \
  --peer-client-cert-auth \
  --peer-trusted-ca-file /etc/ssl/certs/etcd-root-ca.pem \
  --peer-cert-file /etc/ssl/certs/s1.pem \
  --peer-key-file /etc/ssl/certs/s1-key.pem \
  --auto-compaction-retention 1"
EOF
mv /tmp/20-cl-etcd-member.conf /etc/systemd/system/etcd-member.service.d/20-cl-etcd-member.conf

Or use a Container Linux Config:

systemd:
  units:
    - name: etcd-member.service
      dropins:
        - name: conf1.conf
          contents: |
            [Service]
            Environment="ETCD_SSL_DIR=/etc/ssl/certs"            

etcd:
  version: 3.2.0
  name: s1
  data_dir: /var/lib/etcd
  listen_client_urls:          https://0.0.0.0:2379
  advertise_client_urls:       https://{PUBLIC_IPV4}:2379
  listen_peer_urls:            https://{PRIVATE_IPV4}:2380
  initial_advertise_peer_urls: https://{PRIVATE_IPV4}:2380
  initial_cluster:             s1=https://{PRIVATE_IPV4}:2380,s2=https://10.240.0.2:2380,s3=https://10.240.0.3:2380
  initial_cluster_token:       mytoken
  initial_cluster_state:       new
  client_cert_auth:            true
  trusted_ca_file:             /etc/ssl/certs/etcd-root-ca.pem
  cert_file:                   /etc/ssl/certs/s1.pem
  key_file:                    /etc/ssl/certs/s1-key.pem
  peer_client_cert_auth:       true
  peer_trusted_ca_file:        /etc/ssl/certs/etcd-root-ca.pem
  peer_cert_file:              /etc/ssl/certs/s1.pem
  peer_key_file:               /etc/ssl/certs/s1-key.pem
  auto_compaction_retention:   1
$ ct --platform=gce --in-file /tmp/ct-etcd.cnf
{"ignition":{"version":"2.0.0","config"...

To see all runtime drop-in changes for system units:

systemd-delta --type=extended

To enable and start:

systemctl daemon-reload
systemctl enable --now etcd-member.service

To see the logs:

journalctl --unit etcd-member.service --lines 10

To stop and disable the service:

systemctl disable --now etcd-member.service

etcd 2.x service

Container Linux includes a unit file etcd2.service for etcd 2.x, which will be removed in the near future. See Container Linux FAQ for more details.

Confirm unit file is installed:

systemctl cat etcd2.service

Check if the etcd service is running:

systemctl status etcd2.service

To stop and disable:

systemctl disable --now etcd2.service